README.md



Waste PPE: addressing the challenge
Framing: PPE waste generation and footprint
Patricia
Waste generation

Landfill volumes have fallen due to the lockdown, whereas medical waste from hospitals have been significantly increased due to the disposal of tons of soiled PPE.
Reduction in landfill volumes during the pandemic (survey from mid-March to mid-April - Lodge, 2020)
Inbound materials from offices and retail operations have fallen by more than half.


Figure 2: The expected trend of medical and MSW waste flow during the pandemic (Klemes et al., 2020)


China has the most data on this issue:

Amount of MSW in large and medium cities was reduced by 30% during the disease outbreak.
However, the generation of medical waste increased sharply - by 370% in Hubei Province, with a high proportion of plastics.
20 January-31 March: The accumulated medical waste in all China was estimated as 207 kt.
In Wuhan, medical waste increased from the normal level of 40 t/d to about a peak of 240 t/d, exceeding the maximum incineration capacity of 49 t/d.


US data on medical waste generation:


Stericycle is the largest hauler of regulated medical waste in the US & operator of 50 medical waste treatment plants. The publicly traded, Illinois-based company neither owns landfills nor recycles equipment.
Stericycle CEO Cindy Miller said on May 7 that the company has seen "a small decrease" in medical waste volumes "due to the postponement of preventative care and elective surgeries and the temporary closure of smaller, independent health care practices."

IBISWorld reports on PPE Manufacturing Statistics in the US cost ~$1,000.
Contact Stericycle?
Contact MGH, through Lorena Altamirano?
Contact other major players in waste management, such as Waste Management Inc. and Republic Services Inc?
Other suggestions?


Waste management & footprint

Effective management of biomedical & healthcare waste requires appropriate identification, collection, separation, storage, transportation, treatment/disinfection and disposal/recovery.
Figure 3: The main waste handling approaches for contaminated waste during COVID-19 (Klemes et al., 2020)


Incineration and steam sterilisation are the most common pathways for thermal treatment of hazardous medical waste.
Plastics have calorific values comparable to conventional fuels (Gasoline: 43 / LNG: 47 MJ/kg).
Figure 4: The calorific value of plastic and the exhaust gas released by incinerating MSW, hazardous waste and sewage sludge (Klemes et al., 2020).


The energy embodied in plastic waste can be recovered if adequately managed.
Figure 5 shows the typical energy consumption in the  life cycle of plastic products (withouth considering the transportation stage).


The embodied energy in the plastic can be recovered through primary and mechanical recycling, energy recovery and possibly chemical recycling (depolymerisation).
The concept of Plastic Waste Footprint (PWF) can be used as a metric for environmental burdens, to compare alternative solutions on plastic production & waste management: the total mass of plastic waste generated by a process/product or service minus the amount of plastic avoided /reused / recycled / reprocessed.
Further research:

Collect data on PPE Lifecycle: CO2/GHG emissions of PPE generation & waste management
Is it sustainable to use PPE as an energy source?


Nik


Stericycle Earnings Report indicates no increase in April compared to previous year, expects major surge post June 1 as America opens.
Wuhan produced 40 tons per day pre-coronavirus, 240 tonnes per day during peak coronavirus. Could expect a 6 fold increase. Rapidly built waste treatment plants.
-  Multiple medical waste experts told Waste Dive the virus is classified as a Category B situation, and so exposure to it poses a lower risk threshold than Ebola or another Category A disease. 
3 days surface expectancy, Source: https://www.nejm.org/doi/full/10.1056/NEJMc2004973


Overview
Reuse: priority (use cycles); then eventually recycle/degrade/incinerate