Apple UI

Peel your apples here!

To Run Lathe

  1. run cuttlefish (node cf)
  2. plug in to USB (won't be necessary for rasberry pi - all the green light should go on for each stepper
  3. turn on 24V power supple
  4. open the Local Cuttlefish in another window and restore applejack-XA-YD-ZC system - once fully loaded all the motors should be locked
  5. if you want to debug any errors that might crop up, hit CTRL (/apple) + Shift + J to open the Chrome console
  6. run whatever you want from the UI
~ note ~ to run more than one toolpath, you should restart the system so that it can zero again. ~ note ~ Cuttlefish likes to be run in a foreground tab (since it relies on requestAnimationFrame. Backgrounding Cuttlefish will result in it grinding to a halt

Shutting Down

  1. turn off 24V power supply
  2. unplug USB
  3. close cuttlefish (edited)